1986 black Spree project
Moderator: Moderator
Re: 1986 black Spree project
Havent really done much as far as my swap, wating for all the parts to roll in and trying to gather up money to buy the rest of the parts I need. It sucks not knowing when you are gonna get paid but I prefer not having a boss so it balances out. Spent all day yesterday cleaning up parts people requested from the 86 spree motor. The shock mount came into today from richdavidson, what a swell guy super fast shipping but its rainy today so I can't really do anything outside. I must say these are some of the best welds I have ever seen especially being so small and precise. I showed it to my dad and was like this is how you weld. His welds look like crap compared to rich hahahhaha it made him a little mad my dad is almost 70
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: 1986 black Spree project
I'm glad the mount go there so fast.
Thanks for the compliments on the welds!!
I can't wait to see that thing mounted up!!
Thanks for the compliments on the welds!!
I can't wait to see that thing mounted up!!
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
Re: 1986 black Spree project
I cant wait either this motor has been sitting on a crate in my "wreck" room just staring at me with a menacing glare hahah I am thinking about going down to the local machine shop and see if they will cut this motor mount for me, i am a little apprehensive about doing it with a table saw
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
Well since I got the shock mount from richdavidson I couldnt just sit around on my laurels and the sun came out so I got to work on the table saw. my blade was too short so i said to * with that. I got the angle grinder and went to work on the mount, took me a while to shave it off just right after i got the majority cut I didnt have any calipers so i had to eyeball it I think I did a pretty good job, won't know for 100 percent till i get a back tire i can still make sure the mounts are right though. I came in to get the shock mount so i thought i would post some progress and you guys let me know what ya think. The hard part will be welding the tab back on for the middle hole in the frame, I have never welded before but I reckon there is a first for everything mmmwwhahah wish me luck
- Attachments
-
- IMAG0237.jpg (67.94 KiB) Viewed 4932 times
-
- IMAG0236.jpg (70.32 KiB) Viewed 4932 times
-
- IMAG0235.jpg (52.21 KiB) Viewed 4932 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: 1986 black Spree project
If you look at the mount you'll see a small slit cut into one side of it.
That slit is made to slide into the edge of the the small bracket located on the frame. Once you mount it you should be able to see what I'm talking about.
Just wanted to give you a heads up.
See pics....
That slit is made to slide into the edge of the the small bracket located on the frame. Once you mount it you should be able to see what I'm talking about.
Just wanted to give you a heads up.
See pics....
- Attachments
-
- IMG_4003.jpg (95.12 KiB) Viewed 4928 times
-
- IMG_3993.jpg (153.64 KiB) Viewed 4928 times
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: 1986 black Spree project
Here's a better pic. This shows the bottom of that bracket sliding into that slit in the mount.
- Attachments
-
- IMG_3806.jpg (101.8 KiB) Viewed 4927 times
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
Re: 1986 black Spree project
I appreciate ya rich. I finally got the motor mount somewhat finished and 2 holes drilled to bolt on the shock mount that way i could test and see how the motor was going to fit etc etc. I do have one suggestion on the shock mount. the side farthest away could stand to be bent a tad bit straighter so the bolt hole does not have to be drilled so close to the edge of the frame I am kewl with it but some people might get a little nervous here are some pics of what I am talking about.
- Attachments
-
- this bend needs to be straightened as much as possible
- IMAGE_251.jpg (74.11 KiB) Viewed 4926 times
-
- IMAGE_248.jpg (41.89 KiB) Viewed 4926 times
-
- IMAGE_238.jpg (43.42 KiB) Viewed 4926 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
check these out, the shock mount worked perfect still gotta weld the tongue back onto the motor mount and drill 2 more holes for the shock mount but I got tired of fooling with it plus i need a rear tire to really know if I cut my motor mount right etc. I used the elite shock instead of the spree shock. what ya think guys?
- Attachments
-
- IMAGE_242.jpg (69.97 KiB) Viewed 4925 times
-
- IMAGE_241.jpg (77 KiB) Viewed 4925 times
-
- IMAGE_240.jpg (83.63 KiB) Viewed 4925 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
more pics
- Attachments
-
- IMAGE_245.jpg (71.5 KiB) Viewed 4925 times
-
- IMAGE_244.jpg (80.2 KiB) Viewed 4925 times
-
- IMAGE_243.jpg (70.64 KiB) Viewed 4925 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
I wanted to see what it would look like with the plastics on should only have to trim off for the carb and the muffler
- Attachments
-
- IMAGE_247.jpg (72.25 KiB) Viewed 4924 times
-
- IMAGE_246.jpg (86.29 KiB) Viewed 4924 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
My brother just brought me a digital caliper he bought for me lol I could have used it today but as it turns out I didnt need it I measured my mount out of curiosity and it measures 99.7mm or 3.92in so I guess I got it right yay me hahahha and he got me a universal valve spring holder I dont think it will fit the clutch i hope it will, will make gettting the bolt off much easier. I know why he got it, trying to tell me to get to work on his 400ex lol gotta install new valves and seat them. I MAY do that tomorrow AFTER I weld the tab on my elite mount lol
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: 1986 black Spree project
That mount looks good man!!
I'm glad it worked out for you. Thanks for the suggestion on the bend. Hopefully I get some more orders so I can make the correction on the next one.
Before you weld your motor mount tab back on, make sure you find yourself some scrap metal of the same thickness and practice welding on it first.
Since you've never welded before, you'll want your first welds on something disposable.
Spree is looking good!!
I'm glad it worked out for you. Thanks for the suggestion on the bend. Hopefully I get some more orders so I can make the correction on the next one.
Before you weld your motor mount tab back on, make sure you find yourself some scrap metal of the same thickness and practice welding on it first.
Since you've never welded before, you'll want your first welds on something disposable.
Spree is looking good!!
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
Re: 1986 black Spree project
Thanks rich, I wouldnt have even tried cutting the mount etc yesterday if you hadnt sent me that shock mount, it works perfect and was sooo easy to install that anyone could do it. I may be interested in one of those side stands next. If they are anywhere near as good as the mount you should have no problem selling them. The idea of just drilling holes instead of welding will convince people to buy The final test will be when I get a rear tire and actually drive the thing down a bumpy gravelly road lol
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
Got all the holes drilled and the mount put on, btw rich I had to shim the bottom arm for the seat latch mechanism because the bolt was in the way but surely whoever gets the next one will figure it out Your mount is almost too easy to install hahhaha
- Attachments
-
- IMAG0256.jpg (48.84 KiB) Viewed 4910 times
-
- IMAG0252.jpg (27.24 KiB) Viewed 4910 times
-
- IMAG0255.jpg (53.91 KiB) Viewed 4910 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1986 black Spree project
Got the motor mount welded successful on my first try, its not pretty but it held up to hitting it with a hammer a bunch and it fit in the frame with a little assistance from the hammer hahha I welded it a tad bit crooked but as long as it works I'm kewl with that. Now I gotta get a rear tire to know if its going to be straight and a kickstart housing to even know if my motor runs hahahha
- Attachments
-
- IMAG0260.jpg (76.23 KiB) Viewed 4909 times
-
- IMAG0259.jpg (70.73 KiB) Viewed 4909 times
-
- IMAG0257.jpg (58.12 KiB) Viewed 4909 times
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma