Metro wheels on an '87 NB50 Aero 50
Moderator: Moderator
Re: Metro wheels on an '87 NB50 Aero 50
what is the benefit of putting Met wheels on an aero?
1985 HONDA AERO
1986 HONDA SPREE
1986 HONDA SPREE
Re: Metro wheels on an '87 NB50 Aero 50
the brakes! they're bigger and the rim is tubeless. the rim is also lighter(?)maxreverb wrote:what is the benefit of putting Met wheels on an aero?
85 honda spree
07 honda ruckus
05 acura rsx typeS (sold)
07 honda ruckus
05 acura rsx typeS (sold)
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Metro wheels on an '87 NB50 Aero 50
Greetings:
To me the main reasons for the Met rim is that the width is correct to mount 90/90 tires. The 1.85 Elite and Aero rims make the profile of the bigger tires look like a bit like a light bulb. Tubeless tires arguably are a bit safer in the event of a high-speed flat - the bead holder keeps things in position, so the tire won't "dislocate" and immediately force a crash. I have flatted both types, and the stiffer tubeless tires are easier to control.
To me the main reasons for the Met rim is that the width is correct to mount 90/90 tires. The 1.85 Elite and Aero rims make the profile of the bigger tires look like a bit like a light bulb. Tubeless tires arguably are a bit safer in the event of a high-speed flat - the bead holder keeps things in position, so the tire won't "dislocate" and immediately force a crash. I have flatted both types, and the stiffer tubeless tires are easier to control.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Metro wheels on an '87 NB50 Aero 50
thats interesting. I was wondering how the brakes handle with some ppl doubling the speed of their aeros almost.
1985 HONDA AERO
1986 HONDA SPREE
1986 HONDA SPREE
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Metro wheels on an '87 NB50 Aero 50
Greetings:
The Aero and early Elite 80mm drums result in extra purchases of OxyClean for laundry management.
The late Elite and Met front Drum diameters are 95mm. These are barely adequate to slow down assertively from 60 or more MPH. You can do it, but only once. Very little danger of locking up the front wheel, which is sort of a good thing if you're not experienced at maximal braking. Still there's that definite uncertainty if you have to stop in a hurry, and I've frequently wished for stronger stopping power.
The Aero and early Elite 80mm drums result in extra purchases of OxyClean for laundry management.
The late Elite and Met front Drum diameters are 95mm. These are barely adequate to slow down assertively from 60 or more MPH. You can do it, but only once. Very little danger of locking up the front wheel, which is sort of a good thing if you're not experienced at maximal braking. Still there's that definite uncertainty if you have to stop in a hurry, and I've frequently wished for stronger stopping power.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Metro wheels on an '87 NB50 Aero 50
def going to be looking in to this for my aero good to know!
1985 HONDA AERO
1986 HONDA SPREE
1986 HONDA SPREE
Re: Metro wheels on an '87 NB50 Aero 50
Greetings!
I have completed this swap with total success on my 86 Aero and it made a night and day difference. The change in tire profile and tubeless selection made hard cornering not just a possibility but confidence inspiring as well. The added front braking power is nothing short of amazing compared to stock and will fully bottom out the front suspension and try to raise the rear.
My setup is as follows:
Elite front panel
Metro front an rear wheel
Aero front spacer
S1 sporty tubeless tires
Everything else is suspension wise is stock and has me wishing for an upgrade!
Hope this helps. I can post pics if you like.
Good day,
AeroVol
I have completed this swap with total success on my 86 Aero and it made a night and day difference. The change in tire profile and tubeless selection made hard cornering not just a possibility but confidence inspiring as well. The added front braking power is nothing short of amazing compared to stock and will fully bottom out the front suspension and try to raise the rear.
My setup is as follows:
Elite front panel
Metro front an rear wheel
Aero front spacer
S1 sporty tubeless tires
Everything else is suspension wise is stock and has me wishing for an upgrade!
Hope this helps. I can post pics if you like.
Good day,
AeroVol
FRED: Black/Red 1986 Aero 50. 65cc Polini BBK, Ruckus Variator, 1000 center, 1000 clutch, Metro Wheels. In town toy. Sold
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
Re: Metro wheels on an '87 NB50 Aero 50
Sounds like a real boss hoss! please post pics!
1985 HONDA AERO
1986 HONDA SPREE
1986 HONDA SPREE
Re: Metro wheels on an '87 NB50 Aero 50
Forgive me for the not so great pictures, I took them on my lunch break.
As you can see he's skittles rough around the edges (broken turn signal, scratched up panels, torn up seat etc) but the black wheels really do look great and do a great job too!
Cheers,
AeroVol
FRED: Black/Red 1986 Aero 50. 65cc Polini BBK, Ruckus Variator, 1000 center, 1000 clutch, Metro Wheels. In town toy. Sold
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
Re: Metro wheels on an '87 NB50 Aero 50
Looks great! i really love the look of the red seat black aeros wicked sharp. I have the red one with the black seat.
1985 HONDA AERO
1986 HONDA SPREE
1986 HONDA SPREE
Re: Metro wheels on an '87 NB50 Aero 50
what did you have to do to get those wheels on? are those the metro brakes also?AeroVol wrote:
Forgive me for the not so great pictures, I took them on my lunch break.
As you can see he's skittles rough around the edges (broken turn signal, scratched up panels, torn up seat etc) but the black wheels really do look great and do a great job too!
Cheers,
AeroVol
85 honda spree
07 honda ruckus
05 acura rsx typeS (sold)
07 honda ruckus
05 acura rsx typeS (sold)
Re: Metro wheels on an '87 NB50 Aero 50
You use '94-'01 front brake.
Lookin good BTW!
Lookin good BTW!
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
Re: Metro wheels on an '87 NB50 Aero 50
natek wrote:what did you have to do to get those wheels on? are those the metro brakes also?
I used all the parts stated in my previous post and it all bolted up like original.
Yes it is a '94-'01 front brake panel. Thanks for the compliment!devenex wrote:You use '94-'01 front brake.
Lookin good BTW!
Cheers,
AeroVol
FRED: Black/Red 1986 Aero 50. 65cc Polini BBK, Ruckus Variator, 1000 center, 1000 clutch, Metro Wheels. In town toy. Sold
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
BURNIE: Orange/Silver 1997 BMW F650st. Had this fella forever. The old tried and true adventure bike. Deceased
Re: Metro wheels on an '87 NB50 Aero 50
I just bought a bunch of parts for a 2004 Ruckus (engine ruined with no oil) I did not get the frame or engine (obviously)
But I did get front and rear rims/tires (tires are like new) fork, brakes...
Any chance this will fit on my '86 Aero 50?
I can post pics if there is even a chance...
But I did get front and rear rims/tires (tires are like new) fork, brakes...
Any chance this will fit on my '86 Aero 50?
I can post pics if there is even a chance...
'86 Aero 50 (NB50)
'01 Yamaha Jog Nextzone
'01 Yamaha Jog Nextzone
Re: Metro wheels on an '87 NB50 Aero 50
well..... the ruckus/ metropolitan brakes are the same and the metro brakes work on the elite. so this sounds like the ruckus brakes will work on the aero. only one way to find out for sure.donut wrote:I just bought a bunch of parts for a 2004 Ruckus (engine ruined with no oil) I did not get the frame or engine (obviously)
But I did get front and rear rims/tires (tires are like new) fork, brakes...
Any chance this will fit on my '86 Aero 50?
I can post pics if there is even a chance...
85 honda spree
07 honda ruckus
05 acura rsx typeS (sold)
07 honda ruckus
05 acura rsx typeS (sold)