Local Vespa shop installed my 65cc bore kit on 87 elite se50
Moderator: Moderator
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
Reeds should be closed, with minimal gap (1mm or so is OK.)
If it didn't run before, your carb is the likely problem. I thought it was running before you installed the kit.
If it didn't run before, your carb is the likely problem. I thought it was running before you installed the kit.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
- hrnytrtlsgsxr
- Elite
- Posts: 719
- Joined: Sat Dec 31, 2005 7:00 pm
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
If the scoot is half pulled apart anyway, changing the jug doesn't take long. I don't even install the sideshields back on mine anymore, as I'm always playing with the engine.
You and Darat both have 65cc kits in your bikes; you two SHOULD be talking about what weights, ramps, and springs to use on that setup once you get it running.
Me, I've got Darat's old '87 Elite powerplant as a basket case in my garage... I should post pics.
You and Darat both have 65cc kits in your bikes; you two SHOULD be talking about what weights, ramps, and springs to use on that setup once you get it running.
Me, I've got Darat's old '87 Elite powerplant as a basket case in my garage... I should post pics.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
Ahhhh ok I am on the same page now. But you guys remember the spree I got from a kid off creigs list for $50? And took the stock engine off and replaced it with a 87 se elite engine? Well I sent both those carbs to greg for him to rebuild for me, on top of which I bought a rebuilt carb thats on the way. Darat? What size jet are you using on your 65cc hookup? I was told to use a 90 if I am running the stock air filter and run 100 jet if I had a after market filter. And what weight combo are you using?
- 85spreeelite
- Elite
- Posts: 337
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: A2/Ypsi
- Contact:
65cc scoot still wont run
I got the rebuild carbs from greg and the 87 elite with the 65cc kit STILL wont start. Darat? I sent a PM to you about this, did you read it? Because I really need your help right about now.