CT Intake with 16 mm carb for my Spree
Moderator: Moderator
CT Intake with 16 mm carb for my Spree
CT intake with Spree adapter and a 16 mm carb from a Lead 80 (has an electric bystarter) for my Spree. Will have an 18 mm set up for my Aero 50.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: CT Intake with 16 mm carb for my Spree
Nice work Bear. Does that carb have an adjustable main and pilot jet?
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
Re: CT Intake with 16 mm carb for my Spree
Yes the carb is PB series Keihin carb with replaceable main and pilot jets.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: CT Intake with 16 mm carb for my Spree
keep us posted
Taz
Taz
Re: CT Intake with 16 mm carb for my Spree
A very tidy looking set-up...adapter is trick...nice.....
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: CT Intake with 16 mm carb for my Spree
Did you ever bore the aero50 cylinder to the 44mm? Sure would be a nice combo with that carb.
Taz
Taz
Re: CT Intake with 16 mm carb for my Spree
Actually I have a 43 mm piston and jug sitting here to go on the Aero 50, as it now has 70 PSI compression. However for the Aero 50, I have an adapter to adapt a Keihin 18 mm carb off of an Aero 125 on to a CT to go on the Aero 50.
I also have the 43 mm piston and jug for the Spree but since it is a healthy as the day it left the factory, so until it breaks, it stays stock.
I also have the 43 mm piston and jug for the Spree but since it is a healthy as the day it left the factory, so until it breaks, it stays stock.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: CT Intake with 16 mm carb for my Spree
I really wish trolls would at least learn basic punctuation. It's hard to call someone names when you cannot even use language effectively...
Very nice on the adapter! You're making me want to dig out my nq50 engine and finally put a crank in it...
Very nice on the adapter! You're making me want to dig out my nq50 engine and finally put a crank in it...
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: CT Intake with 16 mm carb for my Spree
Can we please have a thread without any smart a s s comments????
And yes it is a nice adapter. I wish bear would get this on the bike and test it and give us the results.
Also Bear get that 44mm in that aero50. I am sure you know someone who can bore it for you.
Taz
And yes it is a nice adapter. I wish bear would get this on the bike and test it and give us the results.
Also Bear get that 44mm in that aero50. I am sure you know someone who can bore it for you.
Taz
Re: CT Intake with 16 mm carb for my Spree
or you can keep the stock intake and get a polini 12mm to 19mm intake adapter with a 19mm polini carb.
some people dream of speed, i own your dreams!
Re: CT Intake with 16 mm carb for my Spree
Why? When I have an 18 mm Keihin off an Aero 125 (several in fact) or a 22 mm Keihin or if I really want big a 26 mm Keihin, not counting the OKO carbs I have BUT I don't like big carbs on street engines as the play * with off the line performance and are a b**** to tune. That is why I choose the 16 mm carb, enough bigger to give the Spree some legs with the Taz gears I have in the box with the carb setup.maddog wrote:or you can keep the stock intake and get a polini 12mm to 19mm intake adapter with a 19mm polini carb.
Oh and to keep the stock Spree reeds and use a bigger carb would be a waste of time and money because the reeds would restrict the air flow and make the carb null and void.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree