This is going to be a 1/4 mile set up only, since i got the Nos bike working pretty good, and i got my old 121 from the Pink bike thats going to be incorporated into this bike. This started out when I was cleaning out my storage and found a Yamaha Razz frame and a Elite S frame. Had these for awhile. No use to me because they have no vins. I cut off the front half of the Razz because of the nice rake they have, cut off the back half of the S. On the S Frame i cut off the rear tubes and flipped them around. Left on right, fight on left. The reason for this is I didnt like the width of the frame. This is what I did at work since Saturday..
More to come!
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0198.jpg)
well got a few things done today. I actually had to do some work for a change haha! Rebuild a 139qmb chinese 4stroke motor, replaced the crank and bore..
Anyways I actually got up early and went to my friend machine shop and made this adapter for the 1 1/8 ahead stem. Sorry pics are blurry for some reason..
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0201.jpg)
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0202.jpg)
Alos made this shock mount from the original S Mount, Also used the rear rounded tubes on the back of the S to create this small tail/ gas tank holder/handle
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0200.jpg)
Tomorrow I hope to get the rear mount stretched 8 inches, drop the front, and weld on that Stem adapter and hopefully add some foot pegs if I dont get to busy!
Well this is the start of my mount i did. Half tacked up , just checking it for any ailment issues.
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0203.jpg)
This is the overall length of the bike, 55in wheelbase
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0204.jpg)
I was at the shop today finished up the mount. That pic was only the top side, i added to the bottom as well as welding a plate behind the stretch. I also was working on a strut mount to keep the mount from moving upwards upon acceleration. More to come..
More material lying around the shop..
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0207.jpg)
From that to this..
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0208.jpg)
Location of strut for now, still have to make the top, Used the round tube as a sleeve thru the 1 in pipe for strut. that way it wont collapse when tightened..
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0209.jpg)
LOL blurry pic of what i should look like..
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0210.jpg)
Well just got home from the shop and got my stretch strut mount made and installed. Came out pretty good, im surprised LOL! This is something I defiantly need to add to my other bikes. Just need to addd my front head tube brace and find a good location for foot pegs and the frame is pretty much done.
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0211.jpg)
well today was a half day for me, had to come home and do the shops webpage. At least I got to make my shock rod and start moving over the parts from the Nos Elite bike.
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0212.jpg)
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0213.jpg)
Another day another buck fifty to be made lol..
Finally mounted my seat and made for folding foot pegs. Still deciding on what im going to use for a gas tank. One more bar to add then the frame will be ready for paint.
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0217.jpg)
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0215.jpg)
This is how she sits as of yesterday.. Got alot more things i need to do before the race this weekend!
![Image](http://i665.photobucket.com/albums/vv18/n4smotorwerx/IMAG0218.jpg)