completely redid my 89 elite again (:
Moderator: Moderator
Re: completely redid my 89 elite again (:
Pegged the speedo today on my way to thunder by the bay (: finally up and running reliably, still a little rich, can probably pull another 5 mph from it with the right jetting. Pipe hits hard at 35 mph and just keeps pulling until it pegs the speedo + ~5-10mph gonna gps it tomorrow to see where its at. also found out that not only was the flywheel wrong but the variator was wrong as well, replaced it after it destroyed itself on the way back from thunder by the bay yesterday. Ped pulled in quite a crowd stood out pretty well next to all the harleys and crotch rockets lol.
- Attachments
-
- speedo.jpg (35.64 KiB) Viewed 8782 times
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: completely redid my 89 elite again (:
looks great! thanks for sharing! Keep us updated. Please. Thanks!
Re: completely redid my 89 elite again (:
Been doing ALOT of work to the elite lately and figured I'd share the update.
Still alot to do, paint the rim paint the frame wire everything build a tank repaint plastics mount bars permanently get a new shock build a new intake to move carb, but for 2 days worth of work its getting done
Still alot to do, paint the rim paint the frame wire everything build a tank repaint plastics mount bars permanently get a new shock build a new intake to move carb, but for 2 days worth of work its getting done
Re: completely redid my 89 elite again (:
Had some free time finally and I got the frame all painted up and assembled a roller!! all I gotta do is run the starter feed and get my turn signals headlight and throttle/controls and its good to go for now. also the front rim is temporary will not be my actual rim so the white on the tire is not a problem
I wanna drop these an inch or 2 /:
I wanna drop these an inch or 2 /:
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: completely redid my 89 elite again (:
looks awesome! I love that fat back wheel and chamber pipe! Thanks for sharing!
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: completely redid my 89 elite again (:
Some of the pics didn't load for me... I'd love to see more of the new front end!!!
Re: completely redid my 89 elite again (:
Man that thing is awesome! I would love to build one like that. I like how clean it looks without the speedo, and all that other stuff installed. Great work!
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: completely redid my 89 elite again (:
Very nice. light, low and fast.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: completely redid my 89 elite again (:
Hey nice build curious on how you lowered the front forks? want to drop mine and looking for ideas.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: completely redid my 89 elite again (:
digging the handle bars and rear wheel set up!
Did you get all controls mounted?
Did you get all controls mounted?