Question is: Can I run without a ''valve set starter'' ?
Thanks!
Pascal
valve set starter
Moderator: Moderator
-
- Elite
- Posts: 722
- Joined: Thu Apr 19, 2007 6:40 pm
- Location: oregon coast
Re: valve set starter
* is a valve set starter?
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: valve set starter
"Valve set starter" is the description Honda uses in the parts fiche, for example the NQ50. Honda's NQ50 Service Manual uses the term 'Auto Bystarter' when referring to the same part.
Running with no bystarter will make the scooter run lean, it will create an air leak.Can I run without a ''valve set starter'' ?
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: valve set starter
There is a manual replacement for the by starter available, but why go with out any by starter or the like when they are so cheap.
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- Spree
- Posts: 146
- Joined: Mon Jan 28, 2013 12:02 am
- Location: San Diego
Re: valve set starter
I am running with my bystarter overidden. I switched the internal spring to keep the internal needle closed. Don't run completely without as it will have an air leak.
2000 Suzuki Hayabusa 1300cc
1986 Honda FrankenSpree 49cc
Goped Trailripper 46cc
Bladez Moby 49cc
1986 Honda FrankenSpree 49cc
Goped Trailripper 46cc
Bladez Moby 49cc
Re: valve set starter
I just bought my Spree and the previous owner take the bystarter off and he puts some silicon
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: valve set starter
At least silicone is easy to remove and clean off to put a by starter on it, could have been JB Weld in there, yikesvspecter wrote:I just bought my Spree and the previous owner take the bystarter off and he puts some silicon
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock