My build
Moderator: Moderator
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: My build
Looks great!!! Nice and clean!
Re: My build
really like the color. looks good
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
-
- BMX
- Posts: 45
- Joined: Wed Jul 03, 2013 11:37 pm
- Location: Maine/Hawaii
Re: My build
Are those brand new panels? They look amazing!
-
- BMX
- Posts: 45
- Joined: Wed Jul 03, 2013 11:37 pm
- Location: Maine/Hawaii
Re: My build
Yes they are. Old ones had the typical broken tabs in a couple areas and I just didn't want to mess with tweaking it all to line up nice and flush. It's been a bit of a pricy build but worth it to achieve my goal of making it looks as nice, new and clean as possible.bfowler wrote:Are those brand new panels? They look amazing!
I'd sell it just to build another one but I highly doubt anyone is going to wanna shell out just the cost of the bike and parts I have into it, labor isn't really a factor price wise as this is becoming my newest hobby!
Re: My build
Well I gotta say hats off to you. Super clean elite! Look forward to hearing updates about how it runs!
-
- BMX
- Posts: 45
- Joined: Wed Jul 03, 2013 11:37 pm
- Location: Maine/Hawaii
Re: My build
Thanks guys I'm happy with it. Only thing is today after riding I decided to check my plug... Mocha/brown which is good but that new scorpion exhaust well it has maybe 45 min of run time on it and now the end cap and down to the shroud scoop are turning a Brown color aswell?
What's the deal with that? Is it normal or is there some hidden problem I'm having and stuff is getting WAY to hot?
What's the deal with that? Is it normal or is there some hidden problem I'm having and stuff is getting WAY to hot?
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: My build
the header pipe will tinge in colour a bit .The exhaust header gets really hot way hotter than the cylinder
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: My build
cool you don't have to cut the skirt, but on the aero its real close with a dio.
some people dream of speed, i own your dreams!
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: My build
Very beautiful build. A job well done, Sir! Thanks for sharing!