big block 125cc elite build
Moderator: Moderator
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: big block 125cc elite build
$75 sounds rich for honing a cylinder
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
-
- Goped
- Posts: 97
- Joined: Sat Feb 16, 2013 5:30 pm
- Location: west michigan
Re: big block 125cc elite build
had to be bored 20 thou but yeah i think it was high top
-
- Goped
- Posts: 97
- Joined: Sat Feb 16, 2013 5:30 pm
- Location: west michigan
Re: big block 125cc elite build
welp new news the guy said the bore wouldnt clean up well at the .5mm oversive and i had to get a custom weisco forged piston and the bore overbored 1.5mm or.060 so now it is a 56.5mm bore. the only odd thing is were i have to blend the ports back i can see the transition from the steel bore to the aluminum outer cyl, kinda odd as im used to either or on a scoot engine. but will keep you guys updated just need to find a rear wheel now and be ready to mount