I picked up a 9''x42'' Bridgeport this weekend. I had to borrow a few dollars from the Boss and promised to pay her back by the end of the month. I sold a few Zumas and a lathe. Well worth it. And I got a free CH80 to boot
Thanks to my recent forklift I bought unloading was a breeze!
It took about an hour rolling the mill on steel pipes to get it to the back of the shop. My forklift does not fit in there!
Now I need to wire a phase converter up so I can run this beast.
New Milling Machine in the house
Moderator: Moderator
New Milling Machine in the house
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: New Milling Machine in the house
will you be doing work for us like milling heads and other stuff ???
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: New Milling Machine in the house
^^and charge us reasonable prices hehehehe
me thinks deuce217 needs a bigger workshop... or at least added headroom so said forklift will fit in the future
awesome addition!
me thinks deuce217 needs a bigger workshop... or at least added headroom so said forklift will fit in the future
awesome addition!
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: New Milling Machine in the house
Nice
PNW area with a fab shop to the east and dyno to the south is looking rich for scooter developments.
PNW area with a fab shop to the east and dyno to the south is looking rich for scooter developments.
Re: New Milling Machine in the house
Scooter discounts are always generous. The biggest problem is the lack of time I have. I run a construction company and stay really busy. I am trying to figure out how to get more hours in a day.... Next project, a time machine.
I can shave heads all day, just tell me how many thousandths and send them to me.
I can shave heads all day, just tell me how many thousandths and send them to me.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: New Milling Machine in the house
I am also gonna be able to bore with this new machine, I am gonna play around with some stock bores when I get a chance.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: New Milling Machine in the house
Yay time machine rides for everyone!
Re: New Milling Machine in the house
SWEET shop deuce.
look at the lathe I can work on that.
look at the lathe I can work on that.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: New Milling Machine in the house
ped wrote:SWEET shop deuce.
look at the lathe I can work on that.
Thanks Ped,
It has taken a few years, it all started with a 12v cordless drill then a grinder, then a drill press. I am 28 now, I hope by the time I am 50 I will have a 40x80 shop filled.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)