CH80 1 step at a time
Moderator: Moderator
Re: CH80 1 step at a time
Time to make it a bit more compact.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
Now I am thinking of bringing the handle bars down. I am going check out how much I can cut off from the forks. Lots of excess space. This thing should be a wheelie king! It will also take up less space in the garage. The blue tape is where I will be removing more material.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
Hi Deuce.
I like how you shorten it. a new toy, pocket scooter.
I like how you shorten it. a new toy, pocket scooter.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: CH80 1 step at a time
first time i have see someone do that looks cool to me ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: CH80 1 step at a time
Thanks Ped and Swim,
This scooter should be pretty small when I am done. I absolutely love the ch80 motor, and reliability. They looks are a bit too boring to me though. My plan is to use the rear of the seat and have the handlebars near the front of the seat. Maybe it we will call it the heavycompo? After the smaller motocompo idea.
Another note: I have not opened the side cover yet for to inspect the belt/ variator and other goodies. I bet the roller are going to be horrible at around 25mph, the scooter just stops accelerating well and take forever to reach 35. This poor guy was rode hard and put away wet too many times. Thanks to Honda it still works, too bad there is no kickstart.
This scooter should be pretty small when I am done. I absolutely love the ch80 motor, and reliability. They looks are a bit too boring to me though. My plan is to use the rear of the seat and have the handlebars near the front of the seat. Maybe it we will call it the heavycompo? After the smaller motocompo idea.
Another note: I have not opened the side cover yet for to inspect the belt/ variator and other goodies. I bet the roller are going to be horrible at around 25mph, the scooter just stops accelerating well and take forever to reach 35. This poor guy was rode hard and put away wet too many times. Thanks to Honda it still works, too bad there is no kickstart.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
Make sure to change the rake. If not you're going to hit a pothole and flip or bend something. They came with a horrible angle from the factory but thanks to the wish bone like front suspension it was still safe. If the front comes down so does the back on most bikes.
Looks pretty different for sure, going to be unique!
Looks pretty different for sure, going to be unique!
Re: CH80 1 step at a time
Thanks for the tip! So extend the angle the front wheel further forward because its too vertical from the factory? I think I am on the same page. Kinda like what guys do to choppers.LoveMyHonda wrote:Make sure to change the rake. If not you're going to hit a pothole and flip or bend something. They came with a horrible angle from the factory but thanks to the wish bone like front suspension it was still safe. If the front comes down so does the back on most bikes.
Looks pretty different for sure, going to be unique!
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: CH80 1 step at a time
all you need to do is cut a wage out of the up tub and read welled it back together...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: CH80 1 step at a time
Sounds good thanks.swimmingfree wrote:all you need to do is cut a wage out of the up tub and read welled it back together...
swimmingfree
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
The seat shape reminds me of the old stingray bikes....thinkin you might needa sissy bar
'86 Aero 50 (NB50)
'01 Yamaha Jog Nextzone
'01 Yamaha Jog Nextzone
Re: CH80 1 step at a time
Yeah with the green paint and metallic flakes!donut wrote:The seat shape reminds me of the old stingray bikes....thinkin you might needa sissy bar
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
Hi deuce.
Nice work on the pipe. looks better than factory.
Nice work on the pipe. looks better than factory.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: CH80 1 step at a time
Thanks man, it worked out pretty good. For 8.00 it was my best/ most affordable option. Unless time counts as money... Then I lost my tail.ped wrote:Hi deuce.
Nice work on the pipe. looks better than factory.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: CH80 1 step at a time
Test ride! Rake increased as recommended.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: CH80 1 step at a time
boy that look nice
now what???
are you going to put the body back on????
swimmingfree
now what???
are you going to put the body back on????
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet