Once we had a rough idea of where we needed / wanted it to sit we had a few other things to consider with making up mounts.
- We need the mounts to pivot
- We need the mounts to allow the engine to be removable for if / when work needs to be done
Keep in mind, neither myself or my buddy helping me have done much work on bikes or scooters, so this was a really big learning curve for us.
Here is what we came up with. A 2 piece pivoting and independently removable mount pins that use the factory mount holes of the Jog. Luckily we have a buddy that works a machine shop, he came in VERY handy during this trial and error process.
![Image](https://farm8.staticflickr.com/7400/16463799106_c9f49effdb_c.jpg)
You can clearly see the new shiney parts we had made up for our vision to work.
![Image](https://farm8.staticflickr.com/7409/16303526299_4fbb824dcd_b.jpg)
And here is what we'd do to mount it to the frame itself. With a hollowed out tube/bearing type setup allowing it to pivot from the top.