My Malossi Build
Moderator: Moderator
My Malossi Build
With winter upon us here in Michigan the building season is in full swing! Today I decided was a good day to get rolling on the MHR build. I'm working a lot at a new job so I won't have a lot of time to spend building but the snow won't be gone anytime soon so I have time. So I have pretty much all my parts minus a couple odds and ends I'll be starting off with a virgin case to be ported and bearinged (if that's a word) and here's my parts list.
Malossi MHR 72cc bbk (broke in and ready to go by the Wheelman himself!)
Malossi full counter crank
25mm Dellorto carb
Malossi intake with vl9 reed block (still need to purchase)
Polini for ruckus variator
Malossi for zx belt
Zx rear pully
Stage 6 fully ajustable clutch
Stage 6 bell
8.44 gears
Scorpion pipe
And fresh gaskets and bearings all around.
Ready to get started!! Here's my before pic can wait to compare the pile of parts to a fully built motor!
Malossi MHR 72cc bbk (broke in and ready to go by the Wheelman himself!)
Malossi full counter crank
25mm Dellorto carb
Malossi intake with vl9 reed block (still need to purchase)
Polini for ruckus variator
Malossi for zx belt
Zx rear pully
Stage 6 fully ajustable clutch
Stage 6 bell
8.44 gears
Scorpion pipe
And fresh gaskets and bearings all around.
Ready to get started!! Here's my before pic can wait to compare the pile of parts to a fully built motor!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Thanks I think so as well! And I plan on using the malossi manifold that usualy comes in the kit with the 25mm Dellorto. Not sure of its name but there prolly arnt many malossi makes. That with the vl9 reed cage I think I haven't really come across any other reed blocks that I think would pair well with that manifold.graphite9 wrote:Sweet! That should be a ripper. What manifold are you going to run?
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
That's what I figured LMH and I'm looking for more of a town ripper anyway prolly tune it for some killer bottom end max I need to go ever is 60 and that's not even necessary. 0-45 will be my main speeds. Should be fun I've been collecting parts for this build for awhile now. I'm really excited to test out the stage 6 clutch.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Little update on the MHR build for my aero. All the intake proving is done and half the boost port(other half is about to be started on). So far so good. Once I cut the second have I'll be giving the cases a good thorough cleaning and should have the bearings and crank installed today most likely the top end as well. My oil seals are suposed to be here tomorrow so once I have those I will fully assemble it and test compression before I mount her up to the aero.
Intake porting.
Also shaved my cases for the ZX trans. And Polini for ruckus
Side 2.
Almost ready for the malossi SKF bearings and full counter crank!
Waiting patiently in the freezer with the chicken incase they get hungry fo more then just RPMs!!!
Intake porting.
Also shaved my cases for the ZX trans. And Polini for ruckus
Side 2.
Almost ready for the malossi SKF bearings and full counter crank!
Waiting patiently in the freezer with the chicken incase they get hungry fo more then just RPMs!!!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Well I finished up the boost port and slapped in the bearings and crank everything went super smooth. She's ready for the MHR and oil seals prolly tomorrow I wanna let everything cure over night. But she spins like butta and has me itchin to finish!
Lining her up.
Finished boost port
Bearing time!
Installed:)
Crank side one slid in like nothing!
Side 2 went on easy but never and silky as side one since everything has warmed up/cooled down but still nice and easy. I always throw the tusk puller on the starter side just to make sure it's seated then I install the case bolts.
And the finished product!
Lining her up.
Finished boost port
Bearing time!
Installed:)
Crank side one slid in like nothing!
Side 2 went on easy but never and silky as side one since everything has warmed up/cooled down but still nice and easy. I always throw the tusk puller on the starter side just to make sure it's seated then I install the case bolts.
And the finished product!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My Malossi Build
Very nice job sir! You will love the intake port. I am very pleased with mines. Works!!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: My Malossi Build
Thanks man. I'm excited to get it bolted in to my aero and hear her rip!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Hi curtis. nice work. that's going to be a screamer. a little port work on that head it will be super fast.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: My Malossi Build
What kind of port work do you recommend for the head?ped wrote:Hi curtis. nice work. that's going to be a screamer. a little port work on that head it will be super fast.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Well assembly continued today got my package from G9 that had my oil seals so I started there.
The piston and cir clips!
Copper coated my gasket last night to let it cure up.
Then the cylinder lubed her up with some oil and she slid on nice and easy
Then the head with a fresh o ring
Then on to the manifold which was loaned to me to test. Thanks 1M1S!
And on to the Dellorto 25mm
And this we'll be where she sits tell Wednesday morning!
I still have to pick up my stretched mount from my welder hopefully do that tomorrow and I can mount the motor to the aero and really get this party started!!
The piston and cir clips!
Copper coated my gasket last night to let it cure up.
Then the cylinder lubed her up with some oil and she slid on nice and easy
Then the head with a fresh o ring
Then on to the manifold which was loaned to me to test. Thanks 1M1S!
And on to the Dellorto 25mm
And this we'll be where she sits tell Wednesday morning!
I still have to pick up my stretched mount from my welder hopefully do that tomorrow and I can mount the motor to the aero and really get this party started!!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: My Malossi Build
Just waiting on 3 parts I had to order from honda a woodruff key, exhaust studs, and the washers for the trans and I will be able to finish the assembly! Hopefully by Sunday she will be on the road for tuning
Freshly pressed straight cut 8.44 gears!
Freshly pressed straight cut 8.44 gears!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: My Malossi Build
You can tell the mhr came from keith. Only time I've ever seen a mhr with out high temp coating. It's just not the same looking with out the coating.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: My Malossi Build
Greetings:
Great work! Don't forget some kind of retainer for the oil pump plug and a Woodruff key. (Cheapest part Honda sells...)
Great work! Don't forget some kind of retainer for the oil pump plug and a Woodruff key. (Cheapest part Honda sells...)
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: My Malossi Build
01 Honda Elite S 120cc Taida H20
78 Honda Hobbit Athena
78 Honda Express/Hobbit Stage6/Athena LC 70
00 Gilera Runner PM Tuning 172
09 Aprillia SR50 Malossi Team MHR
81 Puch ZA50 Polini
71 CT70 Blue
79 Z50 Red
78 Honda Hobbit Athena
78 Honda Express/Hobbit Stage6/Athena LC 70
00 Gilera Runner PM Tuning 172
09 Aprillia SR50 Malossi Team MHR
81 Puch ZA50 Polini
71 CT70 Blue
79 Z50 Red