issues with my Prebug build
Moderator: Moderator
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: issues with my Prebug build
You still have it grounded at the factory location?change it if you do..and if you can just drop a smaller carb to see how she reacts
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
Re: issues with my Prebug build
I love sound pop n back fire.
Re: issues with my Prebug build
G9, I'm not sure about specific problems w ground on the zumas, buy these bikes in general seem to have ground issues. On my bike I've noticed everything has a ground wire run to the batt and split off instead of grounding the frame. I've been slowly changing it over one by one, and it seems to be a magic spell that fixes stuff-starter works great, turn signals flash quick and bright, headlight worked better, etc. The way I do it is running a wire from batt straight to the frame (clean the paint from contact point), then find every ground split in the harness and replace it w a ring terminal and ground it to the frame.
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: issues with my Prebug build
Just too much carb for the bore. Same with any sub 82cc, 24mm is all you will ever need.
Re: issues with my Prebug build
tuning vary on 24 vs 28mm carb... 28mm is better.