I HAVE A 1997 SA 50 PA IT WONT STAY RUNNING WHEN I TRY TO GIVE IT GAS IT STALLS I TOOK CARB OFF CLEANED PUT BACK TOGETHER SAME THING REMOVED THE EXHAUST STILL WONT STAY RUNNING HELP!!!!!!!!!!
ok does it idle really high? clean your carb again, like manually, then run seafoam through it while its idleing, have you decarbonized your cylaner head? or ecaust port?
the idle sounds normal cleaned carb again removed every screw blew air in all ports same thing. what is seafoam and where do i find it, also i will have to do hame work to find out how to decarbonized cylaner head or ecaust port is this what is sounds like?
after clearning carb again and running seafoam in with the gas started good but when i gave it gas it wont stay running after reading some posts i found something to try i removed the bystarter and put finger over the hole and it ran good could this be the problem after it warms up ? i put 12 volts to the bystarter and it wont move problem repaired? maybe?