I do use it for medicine! I got a prescription haha. I cook it into butter and mix it w food or make cookies, works like a charm. Works for my back pain & helps me sleep.
It's not broken, it's knotched out to hold my phone so I can watch YouTube while doing scooter-work.
I pretty much am the dimmest bulb of the lot.
What do you use to polish the cover? I used a wire wheel to clean the enamal off and now its just aluminum surface.
So, I screwed up, but I hope I can help others. I started sanding off the paint, but it was oem Honda-san so it took forever to get through and was taking material (metal) w it. So I bought a can of cheap airplane stripper, which is basically paint stripper in a can, but ok for aluminum. After I stripped it I found smooth aluminum underneath that just needed a little mothers Polish to bring out a high luster, except the spots I already sanded :/
So I got my manifold,carb,reeds, and adapter plate all lined up to put in and.... the adapter plate doesn't line up. I needed to drill out a couple holes, if you look closely on sss' ad it shows it in the pick haha. I didn't notice before hand and almost chewed a thread in my block. Got it drilled out and mounted now tho, w thick paper gaskets backed up by permatex ultra grey (closest to hondabond oreillys gas) just in case.havent fired it up yet, still need to do heat cycles.
Got it started today. Gas was leaking out the carb like the float bowls are stuck, but it idled smooth and was running good. I've still got some heat cycles to do.