corsa temp
Moderator: Moderator
corsa temp
I have a corsa bore that seems to run cold, I got a max temp of 290 ish. My plug is not wet, itÔÇÖs a light brown color.
It idles fine, and pulls pretty good. I tried running 112 main and it bogs at WOT, and 114 runs perfect. I lowered the needle one notch and that helped a little. Then tried another notch and it would run like crap. So I raised the needle back up one. I know I need to be in the mid 300ÔÇÖs.
Setup- corsa,
pg long,
26 polini 114 main/40 pilot /2nd notch from top
1500 center spring,
5g weights,
red clutch springs.
I know itÔÇÖs a good thing its running cool, but I know I should be higher, has anyone run into this problem?
It idles fine, and pulls pretty good. I tried running 112 main and it bogs at WOT, and 114 runs perfect. I lowered the needle one notch and that helped a little. Then tried another notch and it would run like crap. So I raised the needle back up one. I know I need to be in the mid 300ÔÇÖs.
Setup- corsa,
pg long,
26 polini 114 main/40 pilot /2nd notch from top
1500 center spring,
5g weights,
red clutch springs.
I know itÔÇÖs a good thing its running cool, but I know I should be higher, has anyone run into this problem?
Re: corsa temp
That intresting, a 114 on that big of a carb to make 290 a wot temp is pretty inpressive. Do you have a tach and what temp gauge? Maybe your not revving it out, therefor not making as much heat? Idk im spit balling.
Also it may help to know the pipe, intake, and trans info like gears.
How long does it take to get to 290 after opening it up from a chilled down idle?
Also it may help to know the pipe, intake, and trans info like gears.
How long does it take to get to 290 after opening it up from a chilled down idle?
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: corsa temp
When I had my corsa my cruising temps were around 300 and highs mid 300s. With my new malossi cast bore It runs cool almost to cool at times as it seems it likes certain temps to produce power. Good thing it sounds like she's sealed up nicely can't explain the cool issue though sorry. Be good to know rpms top speed to make sure your using it to its full potential.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: corsa temp
its on the spark pluggraphite9 wrote:where is your temp gauge hooked up to? cylinder head bolt or spark plug
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: corsa temp
Greetings:
What brand of gauge?
What brand of gauge?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: corsa temp
Idk if those gauges are ever faulty. Maybe he has the perfect storm?
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
Re: corsa temp
What if the carb isnt the size you think it is? I ordered a 23 and for the longest time was wondering why my jets where small on my kit because I thought I had a 21mm. So maybe you got the wrong carb or threw the wrong one on???
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: corsa temp
If it's running well and it sounds like he's pretty darn close to dialed in. I'd almost have to agree with G9. Any way to try another one? For as cheap as they are I'd get another one and see. * of lot cheaper than a new bore if it is reading wrong
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: corsa temp
Greetings:
^+2. Unless you have some super-magic cooling fan or your top speed is like 40, the Corsa should at least hit 300. Or maybe all the rest of us have air leaks?
^+2. Unless you have some super-magic cooling fan or your top speed is like 40, the Corsa should at least hit 300. Or maybe all the rest of us have air leaks?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: corsa temp
The air filter and exhaust are a major factor on jetting. Intake tract window porting and matching the boost port effect it equally as well.
I'm running 50/142 jetting on a 26mm polini with big polini Evo filter, c16, vforce3, ported s6 intake, max race ported corsa, and extreme race ported cases.
My set up is for high rpm track racing.
I'd get a better flowing air filter.
I'm running 50/142 jetting on a 26mm polini with big polini Evo filter, c16, vforce3, ported s6 intake, max race ported corsa, and extreme race ported cases.
My set up is for high rpm track racing.
I'd get a better flowing air filter.
Re: corsa temp
thanks guys, i found the problem, my temp gauge is displaying inaccurate readings, i got a new one coming.