I have the brand new DJ-1 motor mount and will be having that fabricated for fitment soon. As for the engine, it's the one from this post:
viewtopic.php?f=2&t=33088
So it has
Obviously, from looking at the pictures of it, you can tell I am in need of some parts.-AF05 stock crank
-AF05 stator/ flywheel, & fan.
-Stock kickstart cover w/ complete gearing (no cracks or broken tabs, & is in awesome condition)
-Stock variator, stock belt, and stock clutch
-Stock gearing
-Stock oil pump
-Stock intake manifold & reed cage
Right off hand, obviously I need a BBK, Head, shrouds, bolts, muffler, carb.
Other things I am looking to do, is new sliders (possibly even new variator), new belt, and either a new or repadded clutch from JW Parts plus. Also wanna do something with the reeds and intake. Oil pump will be deleted. Not sure if I wanna mess with gearing, but would like some options.
So I've looked on SSS and other websites, and honestly, it gets a bit confusing.. Typically I see something that's for the Aero, then it says AF16... and I'm like... huh?? I have the AF05E, not the AF16, would I be buying the correct part (BBK, intake, reed cage, etc..)??
So I guess what I am asking is recommendations for parts and specific links to where I can find them so I know I am ordering the right stuff. And finally, since this would be the first time for an engine swap, do I need to change any electrical connectors on the Spree to make it all work??
Thanks.
P.S. For sh%@'s and giggles, I might just have to do a dyno run and post the results with all the parts used in the engine.
Won't be like the other Spree though. Those dyno runs were made to get the tuning down right with the intake/carb/airbox, etc. This one will just be for fun.