TwinSpreeio! An exercise in stupidity.
Moderator: Moderator
Re: TwinSpreeio! An exercise in stupidity.
This is the coolest Spree I've ever seen! Great build man.
Currently own:
->1995 Honda Elite 50 (Derestricted)
Have previously owned:
->Multiple 94-01 Elite 50s
->1985 and 1986 Honda Sprees
->1985 Honda Aero 50
->1995 Honda Elite 50 (Derestricted)
Have previously owned:
->Multiple 94-01 Elite 50s
->1985 and 1986 Honda Sprees
->1985 Honda Aero 50
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: TwinSpreeio! An exercise in stupidity.
WOW, Just read the whole post all 4 pages. My fragile scooter mind has been shattered.
Re: TwinSpreeio! An exercise in stupidity.
Failure report.
I have blown the welds on the intake... or the exhaust.
I ripped the exhaust hanger clean off the pipe. I knew it was coming. I have been putting off re welding it because well I'm 90% lazy, 80% of the time.
I also popped a head gasket/oring, so now she sits as I wait for the replacements from europe.
I pulled a bunch of timing out of it, sitting around 15 degrees from 17 and it's quite a bit quicker. I tried to find any definitive info if my Daytona CDI boxes have a slight curve and what that would be but I can't find any info if they are just straight timing or have a curve programmed, So with some trial and error I have this. If I want even more pulled, which I am curious to try I will need to re make my timing plate that holds the pickups. Past me didn't plan well for future me.
I also have started making full exhausts, have got all the port timings, ran it thru a few calculators and will probably try to get the header sections done asap. I finished making the cylinder flanges yesterday and boy howdy they look sporty.
I have blown the welds on the intake... or the exhaust.
I ripped the exhaust hanger clean off the pipe. I knew it was coming. I have been putting off re welding it because well I'm 90% lazy, 80% of the time.
I also popped a head gasket/oring, so now she sits as I wait for the replacements from europe.
I pulled a bunch of timing out of it, sitting around 15 degrees from 17 and it's quite a bit quicker. I tried to find any definitive info if my Daytona CDI boxes have a slight curve and what that would be but I can't find any info if they are just straight timing or have a curve programmed, So with some trial and error I have this. If I want even more pulled, which I am curious to try I will need to re make my timing plate that holds the pickups. Past me didn't plan well for future me.
I also have started making full exhausts, have got all the port timings, ran it thru a few calculators and will probably try to get the header sections done asap. I finished making the cylinder flanges yesterday and boy howdy they look sporty.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: TwinSpreeio! An exercise in stupidity.
Greetings:
Thanks for sharing, PB!![drama :drama:](./images/smilies/drama.gif)
Thanks for sharing, PB!
![drama :drama:](./images/smilies/drama.gif)
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: TwinSpreeio! An exercise in stupidity.
utterly amazing!! fantastic build from top to bottom.. agree with taz, best motor build thread on here by far
any news post failure? get her buttoned back up?
![popcorn :popcorn:](./images/smilies/icon_popcorn.gif)
![worship :worship:](./images/smilies/icon_worship.gif)
![worship :worship:](./images/smilies/icon_worship.gif)
any news post failure? get her buttoned back up?
![popcorn :popcorn:](./images/smilies/icon_popcorn.gif)
projects galore ![nerdy :nerd:](./images/smilies/icon_e_geek.gif)
![nerdy :nerd:](./images/smilies/icon_e_geek.gif)
Re: TwinSpreeio! An exercise in stupidity.
....
Last edited by pitobread on Sat Apr 01, 2023 3:31 pm, edited 1 time in total.
Re: TwinSpreeio! An exercise in stupidity.
Super cool, Very Nice, Best Build.
May be the most power on any build here? Elite or Spree.![rock :rock:](./images/smilies/rock.gif)
![worship :worship:](./images/smilies/icon_worship.gif)
May be the most power on any build here? Elite or Spree.
![rock :rock:](./images/smilies/rock.gif)
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: TwinSpreeio! An exercise in stupidity.
Wow what a great build! What do you do for a living?