Elite 50 won't crank over
Moderator: Moderator
Elite 50 won't crank over
I can add power to the yellow with red stripe at the starter relay.then it will start. Is there another safety switch,that would make the starter not engage.
Re: Elite 50 won't crank over
Elite 50 won't crank over. Add power to the yellow with red stripe at starter relay starts and runs. What should I check.
- vintagegarage
- Elite
- Posts: 815
- Joined: Tue Jun 23, 2015 7:03 pm
- Location: Florida
Re: Elite 50 won't crank over
Each brake lever mount has a switch built into it that works when you squeeze the brake lever. Squeeze either brake lever when you press the starter button and report back what happens.
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Elite 50 won't crank over
vintagegarage has it covered.
Here's a diagram of the circuit. I highlighted the alternate circuit path you created by jumpering +vbatt to relay yellow/red stripe wire.
Here's a diagram of the circuit. I highlighted the alternate circuit path you created by jumpering +vbatt to relay yellow/red stripe wire.