‘86 nq50 was running a week ago but now won’t start
Moderator: Moderator
‘86 nq50 was running a week ago but now won’t start
Here’s what I know
Carb cleaned in the recent past, new spark plug, battery, and coil, stock air filter recently installed, (got the bike with a motorcycle air filter) injector oil drained out and replaced with new gn2, gear case oil also drained and replaced fan blades purchased and installed, and the loose carb housing fixed. I tried checking the spark with the last coil but not the new one. Air mixture screw has been moved and then reset so i don’t know what it was at when it was running. Ask me anything, really could use the help.
Carb cleaned in the recent past, new spark plug, battery, and coil, stock air filter recently installed, (got the bike with a motorcycle air filter) injector oil drained out and replaced with new gn2, gear case oil also drained and replaced fan blades purchased and installed, and the loose carb housing fixed. I tried checking the spark with the last coil but not the new one. Air mixture screw has been moved and then reset so i don’t know what it was at when it was running. Ask me anything, really could use the help.
Last edited by mcfeelin on Tue May 21, 2019 7:46 pm, edited 1 time in total.
Re: ‘86 nq50 was running a week ago but now won’t start
What’s an impeller?
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
Code: Select all
https://en.wikipedia.org/wiki/Impeller
An impeller is a rotating component of a centrifugal pump which transfers energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation.
Re: ‘86 nq50 was running a week ago but now won’t start
I was sure he was referring to a part like that but of his own "description". Wonder where he'd get a spree oil pump? If that's the case, and he didn't prime the pump and the lines, it's no wonder why it doesn't run now.
Anyways, I looked and it shows he has not signed in since he made this first post.....
Anyways, I looked and it shows he has not signed in since he made this first post.....
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Re: ‘86 nq50 was running a week ago but now won’t start
I think hes working on an outboard boat motor. Those impellers commonly wear out over time. Its what makes water cycle through to cool the motor. A 50hp Mercury would be a sweet Spree swap!
I need to find some new haters...the ones I have are starting to like me.
Re: ‘86 nq50 was running a week ago but now won’t start
Ok so the impeller is a fan you ding dongs. instead of blowing (like all of you^) it draws air in. Seriously i just need some ideas here. and no, i didnt screw with the oil pump
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
We know, we're just messin with ya!!
But anyways, turn the carb 2 & 1/2 turns out as your starting point. When you say oil was drained out and replaced, did you bleed the line? Very important.
When you say "LOOSE CARB HOUSING FIXED" this kind of catches my attention. Could you post an image of your setup for reference? If you can't figure out how to do it with the forum image upload tool, you can just link to https://postimages.org/
Re: ‘86 nq50 was running a week ago but now won’t start
https://postimg.cc/TKTNMKxg The bolt holding the housing up was stripped. She’s had a rough life. And I did check to make sure it was pumping oil while she was running. She is so that’s good. All I did was take the line off the oil reservoir, drain the old stuff and put in new stuff
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
So, I can see that the bolt used to fix the carb spacer is different then a normal Spree bolt. That looks somewhat suspect even though it might be fine. Are the O-rings for the spacer in place? Might have an air leak. The bolt on the left looks almost loose (but don't try over tightning it, just asking).
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
There are 2 different sizes for those carb bolts and size does matter, makes me wonder how long that replacement bolt is and if it could be causing an issue.
Re: ‘86 nq50 was running a week ago but now won’t start
So the other bolt was stripped. I don’t believe I have it anymore as it was doing a * job at holding the carb on, and was only a few hundredths of an inch shorter than the new one. It was leaking fuel, that seemed to stop it. And the other bolt is tight. I never saw an o-ring or a spacer when I took it off. I
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
Ah, I think we have the problem figured out then, or at least can narrow it down a bit.
You need part # 91304-GB0-910 (#17 in the image)
https://www.hondapartshouse.com/oempart ... e-oil-pump
You need part # 91304-GB0-910 (#17 in the image)
https://www.hondapartshouse.com/oempart ... e-oil-pump
Re: ‘86 nq50 was running a week ago but now won’t start
Okay I ordered the part, but I’m very very curious what your thought process is.
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: ‘86 nq50 was running a week ago but now won’t start
Mine personally, is if everything is in spec, even down to a simple bolt, it will run. No if's ands or buts.
Re: ‘86 nq50 was running a week ago but now won’t start
ATTENTION!!! I caved and took it to a shop. the only issue preventing her from starting and running was the STATOR!! The issue was most likely caused in part by an aftermarket CDI doing damage over time. Thanks to all who helped me out