No Vaccum for fuel to get to engine
Moderator: Moderator
-
- Noob
- Posts: 7
- Joined: Sat Oct 08, 2022 8:42 pm
No Vaccum for fuel to get to engine
I checked everything and even the crank seal but the vaccum just wont work. Fuel only comes out when i suck on the vaccum line.
Re: No Vaccum for fuel to get to engine
For a start, you could tell us what kind of bike you are having issues with.
Have you done a compression check ?
Have you done a compression check ?
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
-
- Noob
- Posts: 7
- Joined: Sat Oct 08, 2022 8:42 pm
Re: No Vaccum for fuel to get to engine
I have a honda spree nq50 1985. The compression is 140 psi kn the electric start and I don’t know why fuel is not getting to the engine. I checked the vacuum and couldn’t feel any suction
Re: No Vaccum for fuel to get to engine
Have you inspected the reeds ?
Do you have the original airbox in place with a clean filter ?
Have you tried running the engine with a alternate fuel supply...a bottle feeding directly into the carb ?
Do you have the original airbox in place with a clean filter ?
Have you tried running the engine with a alternate fuel supply...a bottle feeding directly into the carb ?
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
-
- Noob
- Posts: 7
- Joined: Sat Oct 08, 2022 8:42 pm
Re: No Vaccum for fuel to get to engine
I think that I found the problem, the reeds were closed air tight shut