Best Spree Stand Ever .
Moderator: Moderator
Best Spree Stand Ever .
I always had problems putting up the stand on a spree ...
I was always feeling around with my foot trying to find it .
And even though a spree is very light you have to give it a little pull to raise it .
Well No more ...
Last week I got a Elite SR for parts and it was a lot heavier than a spree
but I noticed how nice the stand would go up .
Push down and it would almost go up on it's own .
I think Honda figured out that little extra piece of tube acted like a fulcrum .
Well a buddy richdavison34 from the forum stopped by and I was saying I wanted to
put the bar from the Elite on my spree stand and Rich wanted to try out my cracker box welder .
Only problem is the Elite stand is bigger and just dosen't match up .
So I thought just use the Elite part that sticks out ...Might work ???
So we started cutting and Rich started welding (excellent welder )
Came together quite fast or Rich is just a good welder ?
I gave it a quick paint job and stuck it on the Spree .
Bang done worked great first time ...
What a difference easy no lifting ,can find it without looking .dosen't hinder kick starter .
This worked out great . Thanks for all your help Rich (richdavison34)
if anyone gets a chance check out some of the other custom stuff he's done , really quality work .
I am so happy with the way this came out , I might have to talk to richdavison34 and see if we can come up with
a way to make more for all my Sprees .
Here are some pics of the build .
I was always feeling around with my foot trying to find it .
And even though a spree is very light you have to give it a little pull to raise it .
Well No more ...
Last week I got a Elite SR for parts and it was a lot heavier than a spree
but I noticed how nice the stand would go up .
Push down and it would almost go up on it's own .
I think Honda figured out that little extra piece of tube acted like a fulcrum .
Well a buddy richdavison34 from the forum stopped by and I was saying I wanted to
put the bar from the Elite on my spree stand and Rich wanted to try out my cracker box welder .
Only problem is the Elite stand is bigger and just dosen't match up .
So I thought just use the Elite part that sticks out ...Might work ???
So we started cutting and Rich started welding (excellent welder )
Came together quite fast or Rich is just a good welder ?
I gave it a quick paint job and stuck it on the Spree .
Bang done worked great first time ...
What a difference easy no lifting ,can find it without looking .dosen't hinder kick starter .
This worked out great . Thanks for all your help Rich (richdavison34)
if anyone gets a chance check out some of the other custom stuff he's done , really quality work .
I am so happy with the way this came out , I might have to talk to richdavison34 and see if we can come up with
a way to make more for all my Sprees .
Here are some pics of the build .
- Attachments
-
- After a few beers were ready to start .Cut once where ever it looks like it should go ?
- 100_8379.jpg (66.45 KiB) Viewed 4411 times
-
- OK cracked open a 24 of beer I,m ready to start cutting .
- 100_8381.jpg (78.97 KiB) Viewed 4411 times
-
- OK richdavison34 ready to ignite the cracker box welder...Stand Back !
- 100_8401.jpg (58.5 KiB) Viewed 4411 times
-
- Elite
- Posts: 507
- Joined: Fri Jun 11, 2010 6:52 pm
- Location: North Bay, CA
Re: Best Spree Stand Ever .
ha nice lets see the final product
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
Re: Best Spree Stand Ever .
Really enjoy your posts, and watching your builds come together. Very entertaining and awesome. Thanks
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
Re: Best Spree Stand Ever .
More step by step pics on the Spree stand build .
- Attachments
-
- OK got more beer .I think were ready to start .
- 100_8407.jpg (53.72 KiB) Viewed 4406 times
-
- It's hard to find your beer with a shield on .
- 100_8384.jpg (60.07 KiB) Viewed 4406 times
-
- STAND BACK !!!
- 100_8403.jpg (67.73 KiB) Viewed 4406 times
Re: Best Spree Stand Ever .
OK looking good few more beers and ready to go back to the Spree Stand Build .
- Attachments
-
- Getting there .
- 100_8408.jpg (39.05 KiB) Viewed 4405 times
-
- Watching Rich weld was making me really thirsty.
- 100_8409.jpg (40.3 KiB) Viewed 4405 times
-
- Are we done yet ?
- 100_8411.jpg (77.42 KiB) Viewed 4405 times
Re: Best Spree Stand Ever .
Wow it took a lot of beer but finally finished .
Now I will never have to worrie about falling over .
Thanks Rich (richdavison34)
Now I will never have to worrie about falling over .
Thanks Rich (richdavison34)
- Attachments
-
- * ye I,m happy
- 100_8417.jpg (46.86 KiB) Viewed 4405 times
-
- 100_8444.jpg (37.63 KiB) Viewed 4405 times
-
- 100_8437.jpg (44.18 KiB) Viewed 4405 times
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: Best Spree Stand Ever .
That is just * awesome!!!!!
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: Best Spree Stand Ever .
Holy s*** SIX, it looks factory after the paint job!!
I think we'll need a few more beers to figure out exactly how that spree shock mount is supposed to work.
I'm so stoked that it came out so well! Those foot pegs look sick as well!
I'm sure we have many more good ideas and good beers ahead of us.
I think we'll need a few more beers to figure out exactly how that spree shock mount is supposed to work.
I'm so stoked that it came out so well! Those foot pegs look sick as well!
I'm sure we have many more good ideas and good beers ahead of us.
Last edited by richdavison34 on Sat Jun 04, 2011 1:22 am, edited 1 time in total.
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
- richdavison34
- Elite
- Posts: 341
- Joined: Sun May 15, 2011 9:03 pm
- Location: Las Vegas
Re: Best Spree Stand Ever .
I put the bump stop for the center stand on top of your welding table. It's a little rubber piece that fits in the center stand to prevent it from having metal to metal contact with the crank case.
Also, thanks to Don (hopefully soon to be member) for the photos.
Good times SIX. Thanks for having us over.
Also, thanks to Don (hopefully soon to be member) for the photos.
Good times SIX. Thanks for having us over.
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
"The removal of ignorance is more important that the acquisition of knowledge."
1984 Honda Aero 50.
Carb Swap. Cone filter.
- fightingplankton
- CB900F
- Posts: 1119
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: Best Spree Stand Ever .
the stand on my aero scrapes the ground at left turns...how's that one avoid digging in?
'86 spree
'86 aero50
'83 aero80
'86 aero50
'83 aero80
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: Best Spree Stand Ever .
Nice six...
Taz
Taz
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Best Spree Stand Ever .
Nice work and pics are