STARTS GOOD BUT WONT STAY RUNNING

[brad 30]

I HAVE A 1997 SA 50 PA IT WONT STAY RUNNING WHEN I TRY TO GIVE IT GAS IT STALLS I TOOK CARB OFF CLEANED PUT BACK TOGETHER SAME THING REMOVED THE EXHAUST STILL WONT STAY RUNNING HELP!!!!!!!!!!

[MySpree]

try seeing if your spark plug is good, and cheack your compression

[brad 30]

i replaced spark plug runs good until i give it gas then bogs right down carb is cleaned now wat ? comp is good help please

[brad 30]

ok i removed all hoses to carb also removed tank cleaned replaced filter starts then when i give it gas no go

[MySpree]

ok does it idle really high? clean your carb again, like manually, then run seafoam through it while its idleing, have you decarbonized your cylaner head? or ecaust port?

[brad 30]

the idle sounds normal cleaned carb again removed every screw blew air in all ports same thing. what is seafoam and where do i find it, also i will have to do hame work to find out how to decarbonized cylaner head or ecaust port is this what is sounds like?

[brad 30]

where can i find out how to decarbonized cylaner head or ecaust port

[myhonda]

http://www.hondaspree.net/phpBB/viewforum.php?f=5

[brad 30]

after clearning carb again and running seafoam in with the gas started good but when i gave it gas it wont stay running after reading some posts i found something to try i removed the bystarter and put finger over the hole and it ran good could this be the problem after it warms up ? i put 12 volts to the bystarter and it wont move problem repaired? maybe?