Its got the normal chamber style cone.They just put that outer cone like that for sound reasons.z50r-blank wrote:Thanks! Nice work on the drilling and inner tube removal.
It's kinda the opposite of what I thought it would look like inside. I thought the cone would have been reversed.
Later, Thanks again for the pics!
jon
PG Pipes Get Louder?
Moderator: Moderator
Re: PG Pipes Get Louder?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
Ok I went with this style of packing.It new from fmf and it supose to be quiter than the standard white fiberglass packing.I will report on how the sound is with the new packing in there.
All welded up and ready to be used.
All welded up and ready to be used.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
So you just literally stuff it into the back of the pipe, and then reweld the cap back on?
Re: PG Pipes Get Louder?
yeah thats how they did it.The packing they used was a small piece and didn't do much in cutting down the sound.I wrapped the new stuff around the baffle and a little more on the top part as there is more room on top but didn't pack it in tight to make it to tight in there.just tapping on the outside of the can I can tell it sounds more dead in there.The only way to know now is to put it on.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
Ok so I put it on and fired it up today.the sound of the exhaust is much softer than before and now I can hear the carb more than the exhaust when I rev it up.it still has the deeper exhaust tone vs the pg typhoon which has the ding ding ding sound.plus with the inner pipe out of the exhaust tip the flow is harder and the sound is good.so basicly taking the back cap off and changing out the baffle packing did help in cutting down the exhaust noise some.now time to ride it around town to see if it gets louder.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
This is the middle section of the pg long. If you get baffle rattle,this id the guy thats making the noise.they just put really small tack welds to hold it and break off.
cut this section to get to it better.
cut this section to get to it better.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
Why not figure out away to make the pipe cap a slip on arrangement, held in place with a couple of screws, rather the cutting and rewelding it?
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: PG Pipes Get Louder?
that middle section is not the end cap.thats where the baffle rattle is so have to cut it.Bear45-70 wrote:Why not figure out away to make the pipe cap a slip on arrangement, held in place with a couple of screws, rather the cutting and rewelding it?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: PG Pipes Get Louder?
Ah. I see.bakaracer wrote:that middle section is not the end cap.thats where the baffle rattle is so have to cut it.Bear45-70 wrote:Why not figure out away to make the pipe cap a slip on arrangement, held in place with a couple of screws, rather the cutting and rewelding it?
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: PG Pipes Get Louder?
So how is the volume level after riding it for awhile? And what was your reasoning for drilling out the holes in the baffle piece on the endcap (performance or quietness)?
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
Re: PG Pipes Get Louder?
it made it quiter after drilling the holes and putting the new silencer packing but its still loud.the end baffle is too short and the stinger pipe is too short too.wiguy05 wrote:So how is the volume level after riding it for awhile? And what was your reasoning for drilling out the holes in the baffle piece on the endcap (performance or quietness)?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: PG Pipes Get Louder?
The pg long's second end section is backwards from a "traditional" tuned pipe?
Could the rear cone be reattached the opposite direction, and a stinger type silencer be added?
Could the rear cone be reattached the opposite direction, and a stinger type silencer be added?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: PG Pipes Get Louder?
im sure it can. they did it like that to save in material and to keep cost down i bet. silencers are pretty expensive for the size. use that fmf pink cotton candy packing instead of the usual white firberglass stuff. the pink stuff is suppose to make 10% quieter than the white packing.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: PG Pipes Get Louder?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: PG Pipes Get Louder?
what rpm is that pipe set up for ????
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet