Good day,
I took my motocompo apart last year to give the frame a powdercoating.
Just putting it back together and I'm not sure how to re-assemble the headset bearings? I've got all the parts loose in a bag...but there appears to be a top/bottom and I'm not sure what is the right way.
I assume the spree/Elite has similar headset design with the headset bearings...can someone post a photo or explain how it goes back together?
Thanks!
Motocompo headset bearings (probably same as spree)
Moderator: Moderator
-
- BMX
- Posts: 32
- Joined: Sat Jan 18, 2014 11:09 pm
- Location: Canada
Re: Motocompo headset bearings (probably same as spree)
Follow the LINK below to a parts fiche scematic of your steering head...
Hope this helps your sort the puzzle...
https://www.cmsnl.com/ncz50-motocompo-1 ... hy_dtQrKt8
Hope this helps your sort the puzzle...
https://www.cmsnl.com/ncz50-motocompo-1 ... hy_dtQrKt8
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact: