Hi guys as you know i am selling all the dio parts from ruima. Today i took off my derestricted 28mm taiwan exhaust and swapped it out for the high performance YWS V8 exhaust. Verdict scooter will wheelie from 15mph all the way to 35mph then drops the front wheel. This exhaust probably added 3-4hp to the scooter. Night and day. Please bump or leave positive comments thanks honda spree and elite 50 forums
Step 1: Know what tools you need for the job
Socket wrench
Socket sizes; 8mm,10mm,12mm
Flat head screw driver
Also a high temp gasket maker
Step 2: Remove seat and some plastics
Step 3: remove the exhaust
Step 4: prep the area for gasket maker and put the exhuast gasket in.
Step 5: install new exhaust
Step 6: put seat back on and center plastic cover
How to install a performance YWS V8 exhaust complete.
Moderator: FAQ Moderator
How to install a performance YWS V8 exhaust complete.
Last edited by Limp1144 on Tue Jul 14, 2009 12:55 am, edited 1 time in total.
Re: How to install a performance YWS V8 exhaust complete.
cmon guys i know your looking please give it a bump or a positive comment some people do not know how to install a exhaust
Re: How to install a performance YWS V8 exhaust complete.
What is a Bump anyway? I've been meaning to ask. Forum lingo is new to me.
1985 Aero 50--'87 AF05 motor, ported and polished, Ruckus Vari, 1.5K torque spring, 1K clutch springs, drilled exhaust/airbox,#85 jet, Pirelli 3.0-10s= 45mph flat
http://www.myspace.com/the1120s
http://www.myspace.com/the1120s
Re: How to install a performance YWS V8 exhaust complete.
BUMP means it brings this topic up to the top of the forum
Re: How to install a performance YWS V8 exhaust complete.
Wouldn't this post have fit better in Performance Technical?
And what, no exhaust washer?
And what, no exhaust washer?
Re: How to install a performance YWS V8 exhaust complete.
The exhaust washer is in there underneath the gasket maker silly me. Moderator please move my post to performance technical
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: How to install a performance YWS V8 exhaust complete.
indeed that is bit more fittingLimp1144 wrote:The exhaust washer is in there underneath the gasket maker silly me. Moderator please move my post to performance technical
thanks for sharing
projects galore
Re: How to install a performance YWS V8 exhaust complete.
Hope this helps out some noobs
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: How to install a performance YWS V8 exhaust complete.
Greetings:
Honda does not recommend any goo around the exhaust port. A properly-installed exhaust gasket should be sufficient. The goo can cause problems if it gets into the stud threads or drops into the cylinder. I would refrain from using it.
Honda does not recommend any goo around the exhaust port. A properly-installed exhaust gasket should be sufficient. The goo can cause problems if it gets into the stud threads or drops into the cylinder. I would refrain from using it.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH